Ramsond CUT 50DY 50 Amp Digital Inverter Portable Air Plasma Cutter Dual Voltage Review

The Ramsond CUT 50DY Portable Plasma Cutter is the cutter that you can order on Amazon and receive within a week (it’s only four days of fast shipping from Michigan to Missouri). The packaging on the power tool is so tough it can even be air-dropped if called for. The box is lined with an inch thick Styrofoam from the outside to the inside.

What’s more, the internal foam is made to fit the machine to boot. The Ramsond CUT 50DY comes with everything save for an electric plug, since it will work on your 220-volt or 110-volt power source. To be more specific, there’s no way for manufacturers to know what plug they should send you, so it’s best that you provide your own plug (the most common being the 220-volt variety). The cutting power of this cutter should be seen to be believed.


Ramsond’s Cutting Power Galore

Many a customer was amazed at how much cutting power that the 25-pound plasma cutter packs in its svelte and mobile body. It’s a mighty mite of a unit for sure, impressing many an Amazonian or Amazon.com user and verified purchasers. You can start with a ⅛-inch piece of steel and zip right through it like it wasn’t there. You can move up to material that has ¼-inch thickness and still get the same efficient cutting performance.

As for steel with ½ inch in size, you’ll get through it if you take it easy. You’ll be hard-pressed to find anything thicker than those materials. However, amateurs should be warned that they need experience and skill in order to handle cutting content any thicker than half an inch so that you won’t end up damaging the cutter or injuring yourself in the process. It’s also surgically precise when cutting think steel at a low amp setting.

Testing the Limits of the Unit

Cutting ⅛ and ¼ inch aluminum is no problem with the Ramsond CUT Air Plasma Cutter. Just remember that the thinner the material you’re cutting, the lower the amp needed and the greater the thickness, the more amperage is called for. You should also have a steady hand and the right build when making cuts so that they don’t look crooked and jagged. Still, this unit cuts so quickly with no resistance that carefulness is needed to ensure a straight cut.

The people who’ve used cutting torches understand how awkward they can be when handled for the first time. If your only point of reference for cutting is a knife, you’ll have to deal with a bit of a learning curve with this tool. Perhaps investing in a guide of some sort is called for. Nevertheless, all-in-all, it’s a worthwhile investment that lives up to the honor of being one of the best-selling portable plasma cutters in Amazon.com.

wide orange

Ramsond CUT 50DY Specifications

Here are the specs of the Ramsond CUT 50DY 50 Amp Digital Inverter Portable Air Plasma Cutter Dual Voltage:

  • Portable Cutter: This plasma cutter is quite compact yet packs a smooth bite when it cuts through all sorts of content.
  • Materials It Could Cut: The Ramsond CUT 50DY could cut metals like mild steel, alloy steel, stainless steel, aluminum, and copper.
  • Automatic Dual Voltage/Dual Frequency: The unit can support 110 volts 50/60 hertz or 22 volts 50/60 hertz as its power source.
  • Display: The power tool displays an easy-to-read integrated pressure gauge display and current (amps) gauge so that you can have better control of the machine.
  • Duty Cycle: The Ramsond CUT 50DY 50 Amp Digital Inverter Portable Air Plasma Cutter Dual Voltage has a dependable 60% duty cycle.
  • Severance and Cut Thickness: The maximum severance thickness is an inch and the maximum cut thickness is ¾ of an inch.

Ramsond CUT 50DY Review

I love this cutter so much, I can count the ways why I love it. The Ramsond CUT 50DY does not disappoint in the least. I was able to get the most out of it by having a good strong compressor included with loads of airflow.

You should maximize its potential by having a compressor that pushes the molten steel away while you cut and keeps the tip of your torch as cool as a cucumber. As long as you pick your angle and location for cutting with care (the best angle is a 45-degree one to push all that melted steel away), you’ll be able to use the cutter properly, keep its tip cool, and make it worth your investment.

According to 104 customer reviews, the Ramsond CUT 50DY has a 4.3 out of 5 star rating at the time of this writing.

wide orange


According to Amazonian user experience, the tip will get fried in a heartbeat if it were to use weak or no air compressors (that is, defective). You should also have the right technique when using this tool. Watch out for the lack of replacements sold on Amazon; if you break the machine and it’s out of warranty, you’ll have to buy another one full price altogether.

What’s more, some customers have complained receiving defective plasma cutters that don’t work out of the box. Although Ramsond does offer replacement with a phone call, you’ll have to contact them instead of Amazon about it. You’ll get it within three days. The problem is that even the replacement cutters have drawbacks, like the ability to cut only about six inches of metal before shutting off completely. This is why some reviewers rate this cutter as a poor performer.


When all is said and done, even with its innate drawbacks and customers receiving defective units, the fact remains that the Ramsond CUT Plasma Cutter for good reason. It’s a well-priced dynamo of a dual voltage plasma cutter that’s totally portable and effective at its cutting job.

You can control its settings so that you can cut metals thick and thin, dirty or clean. The Ramsond CUT 50DY Portable Air Plasma Cutter (mostly) comes brand new in the box (at least those that don’t arrive defective) and serves as an improvement from a well-known line of cutters, the models CUT50, CUT50D AND CUT50DX. It lives up to its cost-effective legacy, and deserves its spot in the list of best plasma cutter on the market.

wide orange