Wood Lathes: Essential things to know before buying and using this power tool

Typically, a wood lathe is a great tool to work with. Using a wood lathe, you can make a variety of things like –play clubs, table legs, staircase rungs, etc. This kind of tool is provided on the secondary market frequently. As a result, it can be a cost-effective tool to use. So, let’s find out the essential things related to buying a wood lathe.

At first, you need to be sure of what you going to do with a wood lathe. In case, you are just upgrading your machine, you would be better off with some effective suggestions. Usually, the first-time buyers face lots of difficult situations in buying and using this tool. There are two fundamental approaches to rolling wood, spindle, and faceplate. Now, to turn the spindle, it will require two things – chair and table legs. And, this is the normal way to enter the woodturning world. If you are making turned legs for a table, it will lead you to make a table. Aside from this, the faceplate work involves pieces like – round table tops, vases, and bowls. Almost all the people who want to take faceplate work must turn bowls and start from there.

Woodworking 22

The spindles and bowls are suitable for most the beginner lathes. The widely used lathes incorporate a systematic way of working over the bed of the lathe for spindles. And, at the flip side of the headstock will work “offside” for bowls as well. Along with the required faceplates and other materials will need to be left handed threads. In addition, the trouble of setting up for outboard turning indicates that most of the wood turners will not be bothered and settled for creating the big bowl, which will fit over the lathe bed. Modern manufacturers compromise with a headstock that pivots and takes into account greater pieces utilizing the same holding gear as over the bed.

The issue that emerges with this setup starts off from machine speeds. For the most part, spindles are turned much quicker than faceplate work. Substantial bowl blanks, if lopsided as most may be, can work at high speeds shake. It also can cause the lathe to stroll over the floor or transform the wood into a shot. At moderate speeds none of these happen. Six hundred rpm is sufficiently moderate for a twelve-inch bowl, yet slower is better and preferable.

Furthermore, when you are searching for a lathe, you should try to get one that fits your favored style of turning. Usually, a solid set of ways would be important to make up the lathe bed and the faceplate lathes must be sturdy at the headstock, have a low speed, and a big piece of wood. You should keep in mind that wood lathe is a fundamental power tool. So, you have to look for the quality and finishing touch in your tool.

Safety Checklist: Using a Wood Lathe

If not used properly, a wood lathe can be dangerous and harmful. In fact, the newbie’s will have difficulty, if they are not properly trained and taught. As a result, it is important that you have sufficient training and know about the safety checklist of operation fully. So, let’s read out the safety checklist and take a safe approach to using a wood lathe.

Credit: Easywoodworkingplan.com

  1. You should precisely examine all parts of the tool for any imperfections before starting operations. Also, follow the rules for right handling of woodturning tools and hand position on the rest. Always ensure that you are following the guidelines on turning speeds.
  2. You will pick the stock carefully and check it attentively before undertaking a work. Abstain from utilizing wood with bunches or parts.
  3. Make sure that you are allowing laminated or glued-up blanks to make it dry entirely before turning.
  4. When you are about to turn on the power to the lathe, rotate the stock with your hand to ensure it will clear the tool’s rest. Also, don’t adjust the position of the tool rest when the lathe is running.
  5. You will need to give a lot of lighting in your workplace. Without a proper lighting, you can’t operate wood lathe effectively.
  6. If you want to pause or leave the work for something, always turn it off. You should never leave the lathe running.
  7. You must also clean up wood shavings, sawdust frequently as sawdust is able to make fire hazard and explosive atmosphere.
  8. You shouldn’t wear loose clothing or jewelry and always go for long sleeves rolled up and long hair tied back. In addition, you have to wear a dust mask while performing sanding operations. Besides, wearing the safety goggles would help you also. As for the shoes, you are suggested to wear sturdy shoes or boots with non-slip soles.

To finish off, if you are interested in making things from wood, then using hand or power tool would be perfect. The reason is for centuries people have used hand or power tools proudly to make beautiful and important things. So, let’s continue the tradition with a proper approach and safety training.